Intraflux

Your "Intraflux" application allows you to update the Vigik and Vigik+ profiles of your Intratone readers from the non-connected (RW) range. This application is intended for access control professionals using Intratone hardware. Connect to your system Simply launch Intraflux and follow the steps; it will automatically connect to your system. Make sure you are near the Vigik+ reader and have internet access on your smartphone. Configure your control panel Connect to your system via Bluetooth to customize the door delay (from 0.2 seconds to 60 seconds) and the push button type (NO/NC). You have not registered your system online? With Intraflux, you can activate the native Vigik and Vigik+ services. These cannot be modified. If you wish to modify them, you will need to register your equipment on www.intratone.info. You have already created your installation on the management site www.intratone.info. Thanks to Intraflux, your settings made from the management site will be automatically sent via Bluetooth. Renew Vigik+ security Vigik+ requires an update of its services every 12 months maximum. You will need to use the app to update the Vigik and Vigik+ sections. Failure to update Vigik will result in a shutdown of the Vigik and Vigik+ services. This is required by Vigik certification. Intratone resident badges are not subject to this obligation. WHAT THE APP DOESN'T DO: Manage your Vigik access and profiles Directly from your management site www.intratone.info. Your equipment (control panel and Vigik+ RW reading head) must be registered on your management site. Uploading Resident Badges Resident badges are uploaded from the management site using the Intratone USB programmer.