Sonir Remote

Sonir Remote measures your listening position and sends a room correction to Sonir Bench. Bench plays the sweep through your own system. The phone records it, turns it into a frequency response and an automatic PEQ, and sends back only the filter settings. The recording never leaves the phone. How it works - Connect: scan the QR code Sonir Bench shows. Next time it reconnects on its own. - Microphone: choose the input and load a calibration file (UMIK, REW, FRD). Optional. - Level: play a test tone and set your amplifier so the input sits between -12 and -6 dBFS. - Measure: Bench plays the sweep and the phone records it. Add positions to average them. - EQ: choose a target curve (Flat, Tilt, Harman, B&K) and a limit, and send the automatic PEQ to Bench. Measure through the current correction to compare your room before and after. Library Save measurements on the phone and open them again: RT60, EDT, C50, D50, frequency response, ETC, decay and excess group delay. Select two or more to overlay and compare. Requirements - Sonir Bench on a Mac, on the same local network. - The built-in microphone works. A calibrated measurement microphone is recommended. No account, no ads, no analytics.