AQ Mover

AQ Mover is the companion app for the Aquacrom pool cover controller. It connects to the controller over Bluetooth and puts the cover on your phone: open, close and stop it, see what the controller measures, and look back at how the cover and the weather behaved over the past months. REQUIRES AN AQUACROM MOVER The app only works with an Aquacrom pool cover mover installed on your pool. Without one, use "Try demo mode" on the welcome screen to explore every screen with a simulated cover. CONTROL • Open, close and stop the cover with large, clear buttons • Hold to move the cover while you watch it; double-tap for an automatic full run • The cover position and movement are shown live, with a safety notice before the first use LIVE READINGS • Air temperature and humidity at the cover • Battery voltage of the controller • Bluetooth signal strength, so you know where the connection is reliable HISTORY • Temperature, humidity and battery charts for the last 7 days, 30 days or the whole stored period (about six months) • A timeline of every open, close and stop • Export any chart as CSV REMOTES AND SETTINGS • Pair up to five Aquacrom 433 MHz hand-held remotes and remove lost ones • Choose how long the app stays connected when idle • Forget a controller and pair another SUPPORT • Send diagnostics: build a report from the controller's data and share it with Aquacrom support in one tap, only when you decide to PRIVACY AND SECURITY • No account, no cloud, no ads, no analytics: the app has no internet access at all • The connection is protected by the six-digit PIN printed on your controller • Everything stays on your phone and your controller Available in English, Hungarian, German, Italian and French. Requires Bluetooth Low Energy. Aquacrom pool covers and controllers: https://aquacrom.eu