Kiln Control Studio

Connect via Bluetooth to a thermocouple on the kiln and watch the actual temperature stream in as a firing runs, right alongside the target curve for the selected programme. No more guessing what is happening inside a closed chamber while a batch bakes for hours on end without supervision. Choose a firing programme and the target curve loads automatically, showing exactly where the current temperature should sit at every point along the schedule. Start the programme, pause it if something needs attention, or adjust an individual segment without restarting the whole run from scratch every time something changes along the way. Heating faster or slower than planned triggers an alert immediately, along with a recalculated estimate for when the firing will actually finish given the current pace. A slow climb through bisque gets flagged before it turns into a wasted afternoon, and a spike gets caught before it damages a load of work sitting inside the chamber right now. - Bluetooth connection to a thermocouple or kiln controller - Real-time graph comparing actual temperature to the target curve - Start, pause, and adjust controls for individual firing segments - Alerts for heating that runs too fast or too slow against the profile - Automatic recalculation of estimated finish time during a firing Every completed firing gets saved as an actual temperature curve, not just a programme name and a date on a shelf somewhere gathering dust. Comparing that curve against previous batches makes it obvious when a kiln is running hotter than it used to, or when a particular clay body behaves differently than expected this time. Fewer surprises pulled from the kiln, and a growing record that makes every future firing more predictable than the last one ever was. Fewer surprises pulled from the kiln, and a growing record that makes every future firing more predictable than the last one ever was. https://www.freeprivacypolicy.com/live/9a4831e0-c43c-41d3-b89e-cb06f2e09e0f https://www.freeprivacypolicy.com/live/11045f5c-3a53-4d9f-b8d9-bdb13c1ae4d0