Green Growth Monitor
Productivity
Turkey
6807451828 · xyz.tilltech.blue
Screenshots
Description
GreenGrowth turns your iPhone into a yield monitor for the cab.
Connect over Bluetooth to the GreenGrowth telemetry unit on your combine or root
harvester, and watch the harvest draw itself: a coloured swath follows the machine
across the map, shading from low yield to high so you can see how the field is
performing while you are still working it.
BUILT FOR THE FIELD, NOT THE OFFICE
Harvesting happens where there is no coverage. So the app never depends on it. The
Bluetooth link, the decoding, the map, and the whole recorded history live on the
phone. Put it in Airplane Mode and everything still works — connect, harvest, plot,
and replay. When you do get a signal, the app quietly catches up in the background.
WHAT YOU GET
• Live yield map — a colour-graded swath laid down as you drive, at the true working
width of your header, with the sensor delay accounted for so the colour lands where
the crop actually came from.
• Machine status — sensor readings, satellites, speed, moisture, hopper and reaper
state, fuel and engine temperatures, firmware versions, signal strength.
• Session history — every harvest is recorded and can be reopened and replayed later.
A crash or a flat battery costs you at most one second of data.
• Weight tracking and calibration — enter a known load and calibrate the sensor
against it, with a live chart while you do.
• Metric or imperial — pick your units; the app converts everything on screen.
• Supports both grain and root-crop configurations.
REQUIREMENTS
A GreenGrowth telemetry unit fitted to your machine, and Bluetooth switched on.
Contact us if you would like one installed.
Related
Rankings
No chart rankings stored for this app.
Versions
| Version | Country | Observed | Notes |
|---|---|---|---|
| 1.1.0 | Turkey | 30 Sept 2026 | GreenGrowth now runs on iPad. Weight tracking keeps a session history on your phone — every load you clear is saved with its start and stop times, total weight |